Aggregate flooring can last for several decades if you take care of it properly. The flooring is made of a mixture of epoxy resin and small pebbles, sometimes using glass or quartz chips to offer a more stylish look. Due to the many stones, aggregate flooring is often bumpy since the stones’ surface is not flat. However, companies can add another layer of resin to give it a smooth finish. For this reason, aggregate flooring is an incredible choice for your home or business, especially if you want something durable and long-lasting.
However, part of its durability lies in cleaning and caring for it. Aggregate flooring requires special attention beyond tile cleaning due to the materials used. Here’s what you need to know about maintaining aggregate flooring and making it look good for as long as possible:
1. Treat the Floor as a Plastic
Aggregate floors contain a plastic mix and are sealed with resin. It’s best to treat it as a plastic when cleaning it to ensure you don’t damage the floor with products meant for cleaning other floor types.
To get started on cleaning it, use a stiff broom to sweep the floor, removing dust and dirt. Fill a mop bucket with hot water and add some mild detergent to create a soapy mixture. Dip your mop and clean the floor in a figure-eight motion, allowing you to clean large areas in one sweep. Throw out the water, rinse the mop, refill it with hot water and some detergent and mop the floor again. Once you’re done, dry the floor with towels.
2. Reseal the Floor
The resin layer will fade with time, leaving the stones underneath exposed. To prevent this, reseal the floor every five years, preserving its aesthetic and keeping it looking its best for longer.
3. Never Use Harsh Chemicals
Some cleaning chemicals are too harsh for plastics, which means that they can damage your floor and eat away at the resin. Avoid these to enjoy a pristine-looking floor for as long as possible. Additionally, stay away from metal and hard plastic scourers, as they can wreck epoxy resin-coated aggregate floors.
4. Remove Marks According to the Appropriate Methods
Over time, your aggregate floor may accumulate stubborn stains and marks. If you have exposed aggregate floors in your patio, backyard, or driveway, you can keep it clean by regularly rinsing it with a garden hose. However, tire marks, oily spots, and leaf stains won’t go away with water alone.
Instead, use a power washer with hot water and a de-greaser or a concrete-safe commercial chemical cleaner. The hot water will extract the oil from the surface, and the de-greaser will emulsify it, ensuring it washes away. You can also use a poultice for oil spots. All you have to do is saturate sawdust or cat litter with a solvent like a xylene, acetone, or lacquer thinner, then apply the mixture over the stain. Cover it with plastic, and the combination will draw the soil from the concrete.
You can even use advanced technology that uses single-cell microorganisms that ‘consume’ the oil and oil derivatives to remove such stains. They turn the oil into carbon dioxide, and once they’ve eaten all of it, they die off, leaving an oil-free and clean surface behind.
Making your aggregate flooring look spotless can be challenging, especially if you aren’t sure on what to do. By following these tips, you’ll enjoy a beautiful, preserved floor that will last you for several decades.
Whether you’re looking for carpet cleaning in Fresno or grout cleaning in Madera, we can do it all for you at Complete Carpet and Tile Cleaning! We use only eco-friendly products and industry-leading equipment to make your flooring sparkling and spotless. Contact us today to learn more about our amazing guarantees!